2015 DR Power Equipment 14.5 ft-lb Pro Stump Grinder

Easy Transport

• With lugged, high-flotation tires and a lightweight design, the DR Stump Grinder is easy to transport to any stump on your property. And because of their size, the tires keep the machine elevated over the growing wood chip pile as you grind a stump away.

Mining-Grade Teeth

• The cutter head features 8 steel teeth that are tipped with mining-grade tungsten carbide, a material 10 times harder than steel and which is used for drilling through bedrock. Spinning at 2,800 rpm, these teeth take a remarkable 360 "bites" per second!

Simple Hand Controls

• Control the wheel brakes and engine throttle right from the handle bars. Lock one wheel in place while you pivot the machine back and forth to grind away a stump. Unlock and reposition as needed, right from your working position.

Simple Operation

• Position the DR Stump Grinder over a stump, lock one wheel in place with the wheel brake, engage the cutting head, and pivot easily from side to side, shaving an inch or so with each pass. Reposition the machine and repeat until the entire stump is reduced to a pile of wood chips.